| |
|
 |
|
Overview |
$7,000 - $13,000 USD
Varies with configuration |
|
The EDFA Lite (TM) Optical Amplifier uses
proven Erbium-Doped Fiber (EDF) technology to
allow amplification of an optical signal without
the use of costly regenerative repeater stations.
The EDFA Lite (TM) Optical Amplifier can be ordered as a single booster
unit or a multi-wavelength DWDM unit. As well, it may be
positioned in a pre/post or in-line position to
allow the amplification of the signal along any
point of the optical network.
A distinct advantage of using an optical amplifier
is that it increases the allowable distance between
each site before the signal begins to degrade.
It has been proven that when an optical signal
has been amplified using EDF technology, can travel
more than 100 km before the signals need to be
regenerated. |
|
| Features |
- Operating Wavelength Range 1529nm to
1562nm
- Multi-wavelength DWDM operation or single
wavelength booster operation
- Fully transparent at all data rates
and protocols
- Alarm contact closures
- GUI Software for Ethernet or RS232
connection for remote or local access
- -20 dB monitor port on output
- LCD front panel display
- MTBF better than 30 years
- -48 Vdc connection with 120 / 220 VAC, 60/50 Hz power option
available
|
 |
|
TIP EDFA Optical
Amplifier Front View |
| Applications |
|
- DWDM, SONET, SDH Networks
- Single wavelength or multi-wavelength
(DWDM) amplification
|
 |
|
TIP EDFA Optical
Amplifier Rear View |
|
Optical Amplifier
Specifications |
|
|
|
Parameter
|
Pre
Amp |
In-line
Amp |
Post
Amp |
Units
|
| Operating Wavelength |
1529 - 1562
|
nm |
| Saturated Output Power |
17 |
dBm |
| Optical Input Power (min) |
-29 |
-29 |
-10 |
dBm |
| Small Signal Gain |
30
|
dB |
| Noise Figure |
5.5 |
5.5 |
6.0 |
dB |
| Gain Flatness |
1.0 |
1.0 |
1.5 |
dB |
| Polarization Mode Dispersion |
< 1.0 |
ps |
| Polarization Dependent Gain |
< 0.5
|
dB |
| Optical Interface |
FC and SC |
|
| DC Power Supply Voltage |
-48 |
Vdc |
| Operating Temperature |
0 to 65 |
° C |
| Storage Temperature |
0 to 65 |
° C |
|
| |
|
Order Information |
|
| Part Number: TEOA
- 17 - Application - Connector Type - Compatibility |
| Application |
| PRA |
Pre-Amp |
| ILA |
In-line Amp |
| POA |
Post Amp |
|
| |
| Connector Type |
| FCU |
Ultra Polish FC |
| SCU |
Ultra Polish SC |
|
|
|
|
Compatibility |
| <Blank> |
Non-Cisco Compatible |
|
| C |
Cisco compatible |
|
| S |
Special |
|
|
|
|
Example: TEOA-17-ILA-SCU |
| |
|
Other recommended products
Optical Amplifier Protection Switch
Raman Lite
Optical Amplifier |
| |
|
For pricing, availability
and ordering information
contact one of our
Customer Representatives
at 888.250.1562
All products
carry a 1 year Warranty
|
|
;)
;)