CWDM Lite (TM) Products
4-Channel CWDM
8-Channel CWDM
16-Channel CWDM
Dual Channel OADM
8-Channel Mux/Demux

16-Channel Mux/Demux

CWDM Expansion Unit

 
DWDM Lite (TM) Products
WDM Lite (TM) Products
Optical Amplifier Lite (TM) Products
DCM Lite (TM) Products
Hardware Catalog
Overview

 List price $3995 USD


Increase your fiber capacity easily and quickly using our reliable and economical CWDM Lite multiplexers.  These standalone multiplexers increase single fiber capacity to 160 Gbps and can be used with any manufacturers CWDM GBIC, SFP, XFP, Xenpak.  No power cabling and no configuration required. Just install in a rack and connect the fibers, then its ready to work for you!
 
Features
  • 16 channel* CWDM fiber multiplexer
  • single fiber connection
  • Easy to install, requires no configuration or maintenance
  • Can be used on 2 or 1 fiber spans (for 1 fiber span, one unit is required at each end, for two fiber spans, two units are required at each end of the fiber link)
  • Environmentally friendly product, completely passive, no power and no cooling required for operation!
  • Standalone, no other equipment required
  • Low insertion loss - high isolation
  • Disassembles easily for cleaning
  • Fully Universal, bidirectional operation on any port
  • Fully transparent at all data rates and protocols
  • Accepts any data rate on any port up to
    40 Gbps (OC-768)
  • High reliability, MTBF of 1358 years
  • Telcordia/Bellcore GR-1209 and GR-1221 qualified

Applications
Compatibility
  • Fully compatible with all ITU-T G.694.2 optics
  • Compatible with all standard lightwave equipment including, Cisco, Nortel, Alcatel, Ciena, Fujitsu, etc.
Housing
  • 1-RMU (1.75") Aluminum Shelf
  • 19 or 23 inch rack mounting
CWDM Specifications

Specifications
Available Channel Center wavelengths*  1311, 1331, 1351, 1371, 1391, 1411, 1431, 1451, 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611 nm
Insertion Loss (Max) 5.0 dB
Polarization Dependent Loss (max) 0.25 dB
Operating Temperature 0 to +70 ˚C
   
*Wavelengths 1350, 1370, 1390, 1410, 1430 nm may experience high attenuation in older fiber due to high fiber attenuation at water peak. Typically does not exceed 2.5 dB/km.

Ordering Information

Part Number:  TCWM - 16W -01- 20 - 1310  - 1610 - LCU
 
Connector type options:  
FCU - ultra polish FC
SCU - ultra polish SC
LCU - ultra polish LC
 
Learn more about this technology in our free webinars! Click here.
 

Contact our Customer Representatives at 1.888.250.1562
for assistance or other product configurations.

All products carry a 1 year Warranty
 

 
© 2005 Telecom Engineering, Inc. - Telecom Engineering USA, Inc.