|
 |
|
Can be Expanded to 80 channels using our WDM LiteTM
50 GHz Expander |
$7270 USD (100 GHz) |
Increase your fiber
capacity easily and quickly using our reliable and
economical DWDM Lite multiplexers. These
standalone multiplexers
can be used with any manufacturer's DWDM lasers
including GBIC, SFP,
XFP, Xenpak. No power cabling and no
configuration required. Just install in a rack and
connect the fibers, then its ready to work for you! |
|
|
Features |
|
- 40 channel 100 GHz DWDM multiplexer
- Expandable to 80 channels using our 50 GHz
Expander
- Easy to install, requires no configuration
- Environmentally friendly product, completely passive,
no power and no cooling required for operation!
- standalone, no other equipment required
- Used on fiber spans with 2 fibers. Mux and
Demux units required at each end.
- Can be connected to any fiber type
- Disassembles easily for cleaning
- Fully transparent at all data rates and
protocols
- High reliability,
MTBF of better than 1000 years
- Telcordia/Bellcore
GR-1209 and GR-1221 qualified
- Accepts any data rate on any port up to
40 Gbps (100 GHz units)
|
Sorry picture not available
|
|
Applications
|
-
Any equipment using
100 GHz ITU-T optics
-
SONET OC-3 to
OC-192, SDH STM-1 to STM-64, GBIC, SFP, XFP,
Xenpak, Ethernet over fiber, ATM over fiber
etc...
|
|
Compatibility |
- Fully compatible with all ITU-T
100 GHz optics
- Compatible with lightwave equipment
including, Cisco, Nortel, Alcatel, Ciena,
Fujitsu, etc.
- specify required channel wavelengths on order
|
|
Housing |
- 2-RMU (3.5") Aluminum Shelf
|
|
DWDM Specifications |
|
|
Specifications |
100 GHz Spacing |
| Available Wavelengths |
100 GHz Wavelengths |
| Insertion Loss Mux/Demux pair (Max) |
7.5 dB |
| Operation Temperature |
-5 ~ +65
˚C |
| Storage Temperature |
-40 ~ +85
˚C |
|
|
|
Ordering Information |
|
| Part Number:
TDWM - 40M/D - 01 - 100 - First
λ
- Last λ
- Connector Type |
|
First λ and Last λ
Channel Wavelengths |
Customer are to select the
first and the last consecutive ITU wavelength in
the 100 GHz spacing.
See
Telecom Engineering 100 GHz DWDM ITU Table for
selection. The wavelengths selected must be in
consecutive order. Contact our
Customer Representative for further assistance. |
|
| Connector Type |
FCU
SCU
LCU |
Ultra Polish FC
Ultra Polish SC
Ultra Polish LC |
|
|
|
|
|
Learn more about
this technology in our free webinars! Click here. |
|
Contact our
Customer Representatives
at 1.888.250.1562
for assistance.
All products
carry a 1 year Warranty
|
