|
|
Overview
Increase your fiber
capacity easily and quickly using our reliable and
economical DWDM Lite multiplexers. These
standalone multiplexers increase single fiber capacity to 40 Gbps and
can be used with any manufacturer's DWDM GBIC, SFP,
XFP, Xenpak. No power cabling and no
configuration required. Just install in a rack and
connect the fibers, then its ready to work for you! |
$2,480 USD
(200 GHz)
$4,100 USD (100 GHz) |
|
| Features |
- Dual 4 channel DWDM multiplexer
(2 DWDM units in one 1-RMU
case)
- ITU-T Grid 200 GHz or 100 GHz
spacing
- Easy to install, requires no configuration
- Can be used on 2 or 1 fiber spans (for 1
fiber span, one unit is required at each end,
for two fiber spans, two units are required at
each end of the fiber link)
- Can be connected to any fiber type
- Environmentally friendly product, completely passive,
no power and no cooling required for operation!
- Standalone, no other equipment required
- Low insertion loss - high isolation
- Disassembles easily for cleaning
- Fully Universal, bidirectional operation on
any port
- Can be used on 2 or 1 fiber spans
- Fully transparent at all data rates and
protocols
- High reliability,
MTBF of 3426 years
- Telcordia/Bellcore
GR-1209 and GR-1221 qualified
- Accepts any data rate on any port up to
40 Gbps (OC-768)
|
 |
| Application |
-
Any equipment using 200 GHz or
100 GHz ITU-T optics
-
SONET OC-3 to
OC-192, SDH STM-1 to STM-64, GBIC, SFP, XFP,
Xenpak, Ethernet over fiber, ATM over fiber
etc...
|
|
Compatibility |
- Fully compatible with all ITU-T 200 GHz or
100 GHz optics
- Compatible with lightwave equipment
including, Cisco, Nortel, Alcatel, Ciena,
Fujitsu, etc.
- specify required channel wavelengths on order
|
| Housing |
- 1-RMU (1.75") Aluminum Shelf
|
|
DWDM Specifications |
|
|
|
|
Ordering Information |
|
| Part Number: TDWM
- 04W - 02 - Spacing - First
λ
- Last λ
- Connector Type |
|
First λ and Last λ
Channel Wavelengths |
| Customer are
to select the
first and the last consecutive ITU wavelength in either
the 100 or
200 GHz spacing.
See
Telecom Engineering
100 GHz or
200 GHz DWDM ITU Tables for
selection. The wavelengths selected must be in
consecutive order. Contact our
Customer Representative for further assistance. |
| |
|
Channel Spacing |
| 100 |
100 GHz Spacing |
|
| 200 |
200 GHz Spacing |
|
|
| |
| Connector Type |
FCU
SCU
LCU |
Ultra Polish FC
Ultra Polish SC
Ultra Polish LC |
|
|
Example: TDWM-04W-02-100-23-26-SCU |
|
Other configurations
are also available
|
|
Contact our
Customer Representatives at 1.888.250.1562
for assistance.
All
products carry a 1 year Warranty
|
|
Learn more about
this technology in our free webinars! Click here. |
|
|
