|
All
training classes are provided at customer's site.
Course content and length can be customized
to meet your requirements.
Please call us for pricing and other specialized training
not listed here.
(Note: dependent on course and duration, prices
range from $800 to $1800 per person)
|
| |
Outline:
- an introductory course for engineers,
managers and technicians
- the student will be introduced
to the fundamentals of a fiber optic networks,
installation and testing
techniques |
| Location: your
location |
| Instructor: Bob
Chomycz, P. Eng./Luke Fox, P. Eng |
| Duration: 1
or 2 days |
| |
| Morning
Session: |
|
| Introduction to Fiber Optic Communication |
- Optical Fiber History
- Advantages and Deterrents of Optical Fiber
Communication
- Practical Examples of Optical Fiber Communication
- LAN Data, Voice, and Video Communication
|
| Introduction to Optical Fiber |
- Optical Fiber Light Spectrum
- Transmission Techniques
- Analog and Digital Signals
|
| Optical Fiber Composition |
- Fiber Diameters
- Light Transmission in a Fiber
- Multimode Fiber
- Step-Index Fiber
- Graded Index Fiber
- Optical Power Loss
- Data Rate Limitation
- Optical Fiber Example
|
| Fiber Optic Safety |
- Safety Precautions When Working with Optical
Fiber
|
Afternoon
Session: |
| |
| Fiber Optic Cable Composition |
- Loose Tube and Tight Buffered Cable
- Cable Jackets
- Strength Member
- Fiber Counts, Cable Size
- Cable Specifications
- Cable Procurement
|
| Method of Handling Fiber Optic Cable |
|
| Splicing and Termination Techniques |
- Splice Enclosures, and Splice Trays
|
| Cable Testing |
- Patch Cords and Connectors
- Power Meter Testing Techniques and dB
|
| Budget Management |
- Pricing of a Fiber Optic System
Optional Second Day:
- WDM and DWDM fundamentals
- Hands on fiber network setup using fiber
jumpers, FDP and OSP fiber
- Hands on fiber testing with power meter and
laser source
- Hands on fiber connector cleaning
- Hands on fiber connector inspection
- Hands on OTDR testing and analysis
|
For
registration and further information
contact our office @ 1.888.250.1562 |
|
 TOP |
WDM
Network Design and Installation Course |
Outline: -
WDM training is a must to increase capacities
to a new or existing fiber cable installation
-
provides the individual with knowledge to design
and implement a basic WDM system |
| Location: your
location |
| Instructor: Bob
Chomycz, P.Eng./Luke Fox, P. Eng. |
| Duration: 1/2
day |
| |
| Contents |
- Fiber Communication Fundamentals
- Laser Type
- Wavelength and Spectral Width
- Fiber Capacity
- WDM Types
- Explanation of WDM and DWDM Operation
- Benefits of Using WDM
- WDM Design and Design Parameters
- Practical Examples
|
| For
registration and further information
contact our office @ 1.888.250.1562
|
| TOP |
Digital
Telecommunications Basics |
| |
Outline: -This course provides
basic knowledge of digital communications, fiber
optics and SONET networks
- Also
provides hands-on practical demonstrations for cabling
and fiber optics |
| Location: your
location |
| Instructor:
Bob Chomycz, P.Eng./Luke Fox, P. Eng. |
| Duration: 2 days |
| |
| Day
1 |
| |
| Digital Communication |
- Analog Communications Fundamentals
- Digital Communication Fundamentals
- Voice, Images and Video as Data
- Interface to the Telecommunications Network
- Multiplexers
- Half Duplex and Full Duplex
- Asynchronous, Synchronous
- Voice Transmission by Digital Networks
|
| The Digital Hierarchy |
- DS0 (56 kb/s, 64 kb/s), DS1, DS3
- T Carrier Network Services and Channels
- Framing
- T1/DS1, T3/DS3, Fractional T1
- B8ZS - Binary Eight Bit Zero Substitution
- D4 Frames, Extended Super Frames
|
| SONET (Synchronous Optical Network) |
- SONET Equipment Fundamentals
- The Digital Hierarchy of SONET
- SONET Protection, UPSR, BLSR, Linear
- Standard Optical and Electrical Interfaces
- Network Management
|
| Timing and Synchronization |
- Why synchronize?
- Synchronization Levels
- Synchronization Equipment and Connection
|
| Cabling for Data Communication |
- T1 Cabling Standard, Colour Codes
- DS3 Cabling Standard
- Fiber Cable Type
- Fiber Connector Types
- DSX3 Equipment, Cabling
- DSX1 Equpiment, Cabling
|
| Testing T1, DS3 and SONET |
- Test Explanation
- Test Setup
- Test Results and Acceptance
|
| Fiber Optics |
- Fiber Optic Safety
- Optical Fiber Pieces
- Laser Light
- Cable Tension
- Cleaning Solvents
- Fusion Splicer
- Fiber Testing
- Cleaning Fiber Connectors
- Connector Types
- Fiber Patch Panel
|
| |
| Day
2 |
| |
| Hands
on Practical: Fiber Optics and Testing/Cabling |
| |
| Cabling for Data Communication |
- T1 Cabling Standard, Colour Codes - identification
- DS3 Cabling Standard - identification
- Fiber Cable Types - identification
- Fiber Connector Types - Installing DSX3 connector
for each student
- DSX3 Equipment, Cabling, Demonstration, Cabling
to DSX3 for each student
- DSX1 Equpiment, Cabling, Demonstration, Cabling
to DSX1 for each student
|
| Testing/Cabling |
- Test Equipment - identification
- Acceptance Criteria - identification
- BER Test Demonstration with DS3 Tester
|
| Fiber Optics |
- Fiber Optic Safety - explanation
- Testing fibers by power meter, demonstration,
class participation
- Cleaning fiber connectors, demonstration,
class participation
- Connector types, fiber patch panel description
and demonstration
- Explanation and demonstration of use of optical
attenuator
- DWDMs explanation of how they work - connect
to tunable laser,
OSA and demonstrate the isolation
curve
|
For
registration and further information
contact our office @ 1.888.250.1562 |
| TOP |
